Use our free print preparation software,PreForm, to import STL or OBJ files, orient models, estimate print times, and monitor prints.

PreForm’s part packing algorithms can automatically arrange many models in a build to maximize the packing density, reduce print time, and limit waste.

During setup and printing, an intuitive Touch UI walks you through every step.

The touchscreen displays a live stream of the print bed so you can watch each new layer take shape. This camera view is also available from your computer in PreForm so you can monitor your print without leaving your desk. 

Take control of your production across multiple locations and machines. Track print jobs and material flow all in one cloud-based Dashboard to ensure minimum downtime and maximum output.

SLS 3D printing fuses powder layer by layer. The unused material supports the parts during printing so you can create complex, interconnecting designs with no need for support structures.

Patent-pending Surface Armor technology creates a semi-sintered shell around the surface of each part, enhancing mechanical properties and surface quality without the hassle of a large, industrial footprint. These qualities are heightened even further when using the inert gas print option available with Fuse 1+ 30W.

Our all-in-one powder recovery station, Fuse Sift, combines part extraction, powder recovery, storage, and mixing in a single device.

Produce fully-functional parts with competitively high powder recyclability to enable less waste and lower cost per part.

Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.

Achieve faster-than-ever printing speeds to deliver prototypes and small series of end-use parts in under 24 hours.

Enable continuous throughput by adding a second, removable build chamber to any Fuse Series workflow.

Industry-leading rapid cooldown times allow you to start a new print within 1-2 hours of your previous print job.

3D print production-ready, end-use parts with our family of SLS Powders, developed specifically for the Fuse Series printers. Our materials, hardware, and software are developed and validated together to deliver peak performance while optimizing cost per part.

Benefit from enhanced mechanical properties and higher powder recyclability when utilizing Fuse 1+ 30W's inert gas atmosphere print option.

Available now: Nylon 11, Nylon 12, Nylon 12 GF, and Nylon 11 CF Powders. Stay tuned for regular releases of exciting, new materials currently in development.